Control Center is the key area for whole CCTV system. Security guards check live view, playback and video patrol through monitor or TV wall at control center. In addition, video intelligent analysis, alarm management, and third-party system integration can be realized based on the VMS.
Recording the operation area is extremely important for industrial park video surveillance solution. UNV system supports dual recording technology. Video can be recorded in both NVR and IP storage device to avoid loss.
Media streaming and signaling are processed separately. Video management server only handle the signaling. The server’s failure will not influence the video storage and live view.
In traditional architecture, video recording would be lost when recording server breakdown. This issue is overcome in UNV’s NGN architecture where network camera sends the stream to IP SAN directly based on iSCSI standard storage protocol. It significantly decreases the investment because there is no media server and recording server in NGN architecture.
UNV VMS supports 1+1 hot spare function. If the Master VMS breaks down, the Standby VMS will take over the service immediately. All service and data will be transferred back to the Master VMS when it recovers.
Different kinds of carrier-class hardware designs ensure the high reliability and ability to work 7/24.
UNV cameras can automatically store video recordings into camera’s SD card when network is disconnected. Once the network is restored, the video recordings will be sent back to storage server. Thus, all of video recordings would be saved even network fails temporarily.
UNV IP SAN supports N+1 hot backup. If any active IP SAN fails, the standby IP SAN will automatically take over the service.
UNV IP storage adopts unique structure allowing 60 bays at a height of 4U with front panel hot swappable. Hence, UNV solution can save more than 60% rack space and using much less power consumption under the same condition.
UNV VMS is a reliable and easy-to-use management platform. Live view/playback, TV wall management, and user role management are all available on VMS client.
In order to meet the requirement of different camera access for different departments and users, UNV VMS can build up a credential system for every account. Administrator can divide different authority levels for every department and every user through credential system. Furthermore, administrator can also log out lower-level users to save resources if needed. In addition, administrator is able to lock users, set valid date and daily valid time through remote operation.
Managers can check live view, playback and alarm notifications at anytime and anywhere through UNV’s APP EZView. It helps managers to work easier with higher efficiency.
Video recordings can be watermarked with customized content to prevent video recordings from unauthorized editing, ensures creditable video record.
Uniview provides a comprehensive security platform which can integrate with other security subsystems such as access control system, alarm system, etc. And UNV management platform also provides interface for other systems to obtain live view, records and other functions through SDK.
UNV LED TV wall can be customized to any size and have a seamless and wide-angle view in command center. With low maintenance cost and low space occupation, UNV LED TV wall is designed and manufactured at a highest standard to satisfy 24/7 constant working requirement and provide good customer experience.
UNV VMS is an easy-to-use management platform designed for CCTV system. Its flexible and feature-rich interfaces help security guards easier and more efficiently verify alarms and take actions.
Playback with one click, play video of the last 5 minutes instantly.
UNV cameras support digital zoom function, and it is ideal for large areas where needs high definition cameras such as parking lots and airplane runway. Cameras can provide more details with digital zoom functions.
When the object is captured by multiple cameras, multiple windows can be displayed on one screen once video track function is activated. Click one of the cameras in the E-map, the live views of that camera and cameras nearby are displayed, helping to locate the moving object.
Video can be divided into several parts with the same time frame. The first frame of each part would be displayed automatically on the screen, forming a group of pictures to help security guards locate the object quickly.
VMS client supports to show alarms on E-maps and links live view on the video wall. It enables security guards to faster locate alarming area, which significantly shortens their reaction time.
Hotline(English):
800-860-7999(USA) | 800-914-6008 (Canada)
+86 571 85309090 (Other Regions)
Email/Skype: service@uniview.com